| |
Inert Gas atmospheres (Stainless steel Glove-box
system)
手套操作箱自動控制系統
General data: (box-1) H2O:
<1ppm
, O2: <1ppm.
Type:Glovebox with gas purification.
Size:Box
length 1500mm,box width 780mm,box height 900mm. All stainless steel
construction.
System control
1.Control unit:Programmable logical controller(PLC可程式控制器)
Model:MITSUBISHI FX2N-16MR+FX2N-4A/D
SPECIAL FUNCTION BLOCK Glove box pressure
vacuum,differential pressure transmitter:0-16mbar/4-20mA. Automatic
pressure control and foot pedals manual control.
Moisture sensor:Aluminium Oxide,Ultra
high Capacitance,sensor with IP65 connector.
Moisture Range:0-1000ppm,4
wire,24V/4-20mA transmitter. Operating temperature range:-20℃ to +60℃,temperature
compensated. Electro -pneumatic valves.,process automation control.
2.Operation:Human machine interface with touch
screen for process control (5.7 inch)
Model:
Fuji Programmable Operation Display TYPE:UG221H-LC4
Power supply:Rated
voltage 24VDC
Voltage allowable
range:24VDC±10%
Allowable momentary
power failure:10ms or less
Current consumption:10W
or less
Inrush current:2A(3ms)
Isolation resistance:500V
DC megger,10M or more
Physical environment:Ambient
temperature:0℃to
+50℃
Humidity:85%RH
or less(No condensation)
Dust:Free
from conductive dust
Withstand
solvent:No cutting fluid or organic solvent stains
Corrosive
gases:Free from corrosive gases
Vibration:Vibration
frequency:10
to 150Hz
Acceleration:14.7m/s2
Single amplitude:0.075mm,3
direction of X,Y and Z
Shock:Pulse
shape:Sine
half wave Peak acceleration:147m/s2 , 3 directions of X,Y and Z
Noise:1500Vp-p(Noise width 1 μs)
Antistatic
discharge:Surface, 6 KV or less
Installation
environment:Grounding:Grounding resistance of 100 or less
Structure:Protection
structure:Front
panel,IP65 of waterproof Rear case,IP20
Shape:one
unit
Mounting
method:Panel-mounted type
Cooling
system:Self cooling type
Mass:Approx.
0.8kg
Dimensions:W182.5
X H138.8 X D50mm
3.Vacuum pump: Direct drive oil -sealed rotary
vane vacuum pump
double stage rotary vane pump with oil mist separator.
Actual pumping speed:237L/min
Ultimate pressure (total pressure)
|
Gas ballast
|
high vacuum mode
|
high throughput mode
|
|
Closed
|
2 x 10-3mbar
|
3 x 10-2mbar
|
|
Low flow,I
|
3 x 10-2mbar
|
4 x 10-2mbar
|
|
High flow,II
|
|
4 x 10-2mbar
|
Inlet connection:NW-25
Outlet connection:NW-25
Motor:Single phase 110v/60hz,550w,4
poles,capacitor starting capacitor run
Oil capacity:maximum 1000 ml,(Ultragrade
19) minimum 650ml
Weight:26.3kg
Ambient operation temp.
range:12-40 ℃.
Full load current:8A
4.Antechamber:
Cylindric type antechamber 400mm dia,length 600mm(inside dimensions).
Material: Stainless steel
type sus 304. Pressure gauge Manometer:analog display
Sliding tray: Stainless
steel type sus 304.
Door: Material
Aluminum,anodized,thickness 13mm.
Door lock:Easy
operate spindle-lock with lifting mechanism.
電源需求:Electrical
power: 110V,60HZ, 20A (power consumption may vary dependent on accessories)
5.Gas purification:(所需氣體業主自備)
Gas
purification system:Removal H2O and O2.
Process
gas circulation:Closed loop gas recirculation.
Working
gas:Inert gas:Nitrogen,Argon or Helium.
Attainable
purity: H2O:1ppm , O2:1ppm.
Purifier:1
H2O/ O2 purifier column. Material:Stainless steel type sus
304, Heater: 300w.
Regeneration:The
purifier unit is regenerable,PLC automatic and menual two model
controlled.
Regeneration:N2/H2
mixture(H2 3-5%) or Ar/ H2 mixture(H2 3-5%).
Gas
purification :Circulation blower max. vacuum 66mbar/max pressure
71 mbar,1/8HP,110V Stainless steel purifier piping.
6.Glove box:
Glove
ports : two pairs type:220mm dia,O-ring sealed.
Material:Butyl,thickness
0.4mm.
Box
light:Fluorescent lamp front mounted.
Feedthroughs
Spare port:KF-40(NW-40)mm x 1 . Rack x 2
7.Options equipment:
1. System with two purifier for continuous operation.
2. O2 measuring instruments(0-1000 ppm).
3. Solvent adsorber or hepa filter.
4. Mini-vacuum chamber or heatable vacuum chamber.
5. Refrigerator.
|
