General data: (box-1) H2O: <1ppm , O2: <1ppm.

Type: Glovebox with gas purification.

Box length 1500mm,box width 780mm,box height 900mm. All stainless steel construction.

System control

1.Control unit:Programmable logical controller(PLC可程式控制器)

odel:MITSUBISHI FX2N-16MR+FX2N-4A/D SPECIAL FUNCTION BLOCK Glove box pressure vacuum,differential pressure transmitter:0-16mbar/4-20mA. Automatic pressure control and foot pedals manual control.

Moisture Range:0-1000ppm,4 wire,24V/4-20mA transmitter. Operating temperature range:-20℃ to +60℃,temperature compensated. Electro -pneumatic valves.,process automation control.

2.Operation:Human machine interface with touch screen for process control (5.7 inch)

Model: Fuji Programmable Operation Display TYPE:UG221H-LC4

Power supply:Rated voltage 24VDC

Voltage allowable range:24VDC±10%

Allowable momentary power failure:10ms or less

Current consumption:10W or less

Inrush current:2A(3ms)

Isolation resistance:500V DC megger,10M or more

Physical environment:Ambient

Temperature:0℃to +50℃

Humidity:85%RH or less(No condensation)

Dust:Free from conductive dust

Withstand solvent:No cutting fluid or organic solvent stains

Corrosive gases:Free from corrosive gases

Vibration:Vibration

Frequency:10 to 150Hz

Acceleration:14.7m/s2

Single amplitude:0.075mm,3 direction of X,Y and Z

Shock:Pulse

Shape:Sine half wave Peak acceleration:147m/s2 , 3 directions of X,Y and Z

Noise:1500Vp-p(Noise width 1 μs)

Antistatic discharge:Surface, 6 KV or less

Installation environment:Grounding:Grounding resistance of 100 or less

Structure:Protection

Structure:Front panel,IP65 of waterproof Rear case,IP20

Shape:one unit

Mounting method:Panel-mounted type

Cooling system:Self cooling type

Mass:Approx. 0.8kg

Dimensions:W182.5 X H138.8 X D50mm

3.Vacuum pump: Direct drive oil -sealed rotary vane vacuum pump
double stage rotary vane pump with oil mist separator. Actual pumping
speed:237L/min

Ultimate pressure (total pressure)

Gas ballast	high vacuum mode	high throughput mode
Closed	2 x 10-3mbar	3 x 10-2mbar
Low flow,I	3 x 10-2mbar	4 x 10-2mbar
High flow,II		4 x 10-2mbar

Inlet connection:NW-25

Outlet connection:NW-25

Motor:Single phase 110v/60hz,550w,4 poles,capacitor starting capacitor run

Oil capacity:maximum 1000 ml,(Ultragrade 19) minimum 650ml

Weight:26.3kg

Ambient operation temp. range:12-40 ℃.

Full load current:8A

4.Antechamber:

Cylindric type antechamber 400mm dia,length 600mm(inside dimensions).

Material:Stainless steel type sus 304. Pressure gauge Manometer:analog display

Sliding tray:Stainless steel type sus 304.

Door:Material Aluminum,anodized,thickness 13mm.

Door lock:Easy operate spindle-lock with lifting mechanism.

電源需求:Electrical power: 110V,60HZ, 20A (power consumption may vary dependent on accessories)

5.Gas purification:(所需氣體業主自備)

Gas purification system:Removal H2O and O2.

Process gas circulation:Closed loop gas recirculation.

Working gas:Inert gas:Nitrogen,Argon or Helium.

Attainable purity:H2O:1ppm , O2:1ppm.

Purifier:1 H2O/ O2 purifier column. Material:Stainless steel type sus 304, Heater: 300w.

Regeneration:The purifier unit is regenerable,PLC automatic and menual two model controlled.

Regeneration:N2/H2 mixture(H2 3-5%) or Ar/ H2 mixture(H2 3-5%).

Gas purification:Circulation blower max. vacuum 66mbar/max pressure 71 mbar,1/8HP,110V Stainless steel purifier piping.

6.Glove box:

Glove ports:two pairs type:220mm dia,O-ring sealed.

Material:Butyl,thickness 0.4mm.

Box light:Fluorescent lamp front mounted.

Feedthroughs Spare port:KF-40(NW-40)mm x 1 . Rack x 2

7.Options equipment:
1. System with two purifier for continuous operation.
2. O2 measuring instruments(0-1000 ppm).
3. Solvent adsorber or hepa filter.
4. Mini-vacuum chamber or heatable vacuum chamber.
5. Refrigerator.